Category: Partners

Texas Facility Expansion Increases Magnet Capacity, Supports Domestic Critical-Minerals Supply Chains and Increases Post-Tax NPV to US$780 million (forecast prices) and US$409 million (current prices)

VANCOUVER, BRITISH COLUMBIA / ACCESS Newswire / December 15, 2025 / CoTec Holdings Corp. (TSXV:CTH)(OTCQB:CTHCF) (“CoTec” or the “Company”) is pleased to note today’s press release by HyProMag USA, LLC (“HyProMag USA”), its U.S.-based joint venture rare earth permanent magnet recycling and manufacturing company.

HyProMag USA announced that it has expanded the magnet capacity of its first facility (the “Texas Hub” or the “Project”) and has updated the valuation of the Project with the completion of the Class 2 AACE ^[i] capital cost estimate as part of the Detailed Engineering Design and Value Engineering Phase (the “Detailed Design”). The Class 2 AACE capital cost estimate and detailed value-engineering work confirm a significant increase in magnet production capacity and materially improved Project economics.

In parallel, HyProMag USA has commenced a strategic review to evaluate a potential separate listing in the U.S. for late 2026 or early 2027, subject to successful execution of the Project and meeting the required regulatory approvals.

Key Highlights

• Uplift in project valuation: Detailed Engineering results for state-of-the art rare earth magnet recycling and manufacturing operation in the United States with a Texas Hub supported by two pre-processing spoke sites co-located at Intelligent Lifecycle Solution (“ILS”) sites in South Carolina and Nevada ^[ii] :

  • US$409 million post-tax Net Present Value (“NPV”) ^[iii] and 27.6% real internal rate of return (“IRR”) based on current market prices ^{[iv], [v]}

  • US$780 million post-tax NPV and 38.7% real IRR based on forecast market prices ^[vi]

• Increased magnet production capacity: 941 metric tons per annum of recycled sintered NdFeB magnets and 611 metric tons per annum of associated NdFeB co-products (total payable capacity – 1,552 metric tons NdFeB) over a 40-year operating life

• Competitive operating profile: Low all-in sustaining cost (“AISC”) ^{Xii, [vii]} of US$22.3 per kg of NdFeB product versus current weighted average market price of US$56.8 per kg of NdFeB products, with significant scope for price recovery from current market conditions

• Scalable design with expansion potential: The optimized layout allows for the inclusion of an additional two furnaces within three years following commissioning for an additional capital cost of approximately US$3 million

• Up-front capital cost: Total initial capital cost of US$142 million ^[viii] (inclusive of an 8.2% contingency margin and Class 2 AACE estimated detailed design study and engineering costs) over a one-year construction phase

• Attractive payback ^[ix] profile:

  • Payback at current market prices in 3.1 years at a profitability index (“PI”) ^[x] of 2.89

  • Payback at forecast prices in 2.2 years at a PI of 5.5

• Industrial and workforce impact: The Plant ^[xi] is expected to support revitalization of the U.S. magnet sector and create 90-100 skilled magnet manufacturing jobs

• Feedstock security: HyProMag USA is continuing to develop its feedstock sources and supply through its partnership with ILS ^[xii]

• Carbon profile: Independent ISO-compliant study for the feasibility study confirmed a very low carbon footprint of 2.35 kg CO ₂ -eq per kg of NdFeB sintered block product ^[xiii]

• Detailed Engineering: led by PegasusTSI Inc. (U.S.) and BBA USA Inc. (Canada), with support from HyProMag’s international teams and the University of Birmingham

Julian Treger, CoTec CEO commented: “We are very pleased with the results of the Detailed Design to date and the resulting increase in magnet capacity and improved economics of the Texas Hub, the first of several hubs targeted by HyProMag USA. We believe that the Project provides a unique opportunity for the U.S. to partially address its dependence on foreign supplied rare earth magnets and alloy powders, critical inputs for accelerating the reshoring of U.S. manufacturing. With the Texas site secured through a long-term lease, Detailed Design well advanced and robust economics, our focus is now on securing sufficient feedstock and the necessary finance to commence with construction.

We have also started evaluating the pathway towards a potential U.S. listing, recognizing the opportunity to broaden our investor base and strengthen access to capital. Any listing would be subject to a successful execution of the Project and securing the necessary regulatory approvals. We expect that the timing of a U.S. listing, if pursued, would be towards late 2026 or early 2027.”

Detailed Design and Project Economics Update

The Detailed Design, undertaken by a multidisciplinary team appointed by CoTec and Mkango and led by independent engineers, PegasusTSI and BBA, is now circa 30% complete and part of the study to date included an optimization of the operation as well as an updated capex profile. This has resulted in an increase in the post-tax NPV of the Project from US$262 million and an IRR of 23% based on current estimate prices to an NPV of US$409 million and an IRR of 27.6%. Using forecast market prices the post-tax NPV of the Project increases from US$503 million and an IRR of 31% to a post-tax NPV of US$780 million and an IRR of 38.7%.

The main driver of the increased economics was the debottlenecking of the magnet lines resulting in an increase in magnet production from circa 750 metric tons of magnets to 941 metric tons of magnets per annum. Furthermore, the Project is expected to provide 611 metric tons of NdFeB alloy co-products per annum. The average market price of NdFeB magnets increased by circa US$10 per kg Product from the feasibility study. NdFeB alloy co-products make up 39% of overall production compared to 28% in the feasibility study with the additional third Hydrogen Processing of Magnetic Scrap (“HPMS”) vessel, resulting in an increase in average market price of all NdFeB Products from US$55 per kg Product to US$57 per kg Product.

The Detailed Design review also resulted in an increase in capex for the Project from US$135 million to US$142 million due to the addition of magnet finishing equipment and advanced Grain Boundary Diffusion (“GBD”) techniques. GBD allows the Texas Hub greater operational flexibility to make grades of magnets with higher coercivity (>20 kOe), which are capable of operating at higher temperatures.

Potential Future U.S. Listing

HyProMag USA’s owners, CoTec Holdings Corp. (TSXV: CTH; OTCQB: CTHCF) (“CoTec”) and Mkango Resources Ltd. (AIM/TSX-V: MKA) (“Mkango”) believe that a separate listing of the shares of HyProMag USA in the U.S. could potentially provide it with access to a broader investor audience, increased sources of potential capital, increased research coverage from U.S. investment banks and institutions at a critical time of rebuilding U.S. critical mineral supply.

HyProMag USA has begun engaging with prospective advisors to evaluate this pathway. Any listing-if ultimately pursued, would depend on:

• Successful execution of the Texas Hub

• Prevailing market conditions

• Its ability to meet U.S. regulatory requirements and secure necessary approvals

While no decision has been made, HyProMag USA expects that any possible listing would occur no earlier than late 2026 or early 2027.

Data Verification

The independent engineers are professional engineers employed by Pegasus TSI, BBA, and Weston Solutions who are responsible for engineering design, processing, infrastructure, transportation, services, capital costs, operating costs, project timeline, permitting and economic analysis. The independent engineers have reviewed and approved the scientific and technical content and the resulting impact on the economics of the Project contained in this news release.

About HyProMag USA

HyProMag USA LLC is owned 50:50 by CoTec Holdings Corp. (TSXV: CTH; OTCQB: CTHCF) (“CoTec”) and HyProMag Limited. HyProMag Limited is 100% owned by Maginito Limited which is owned on a 79.4%/20.6% basis by Mkango Resources Ltd. (AIM/TSX-V: MKA) and CoTec.

For more information, please visit www.hypromagusa.com

About CoTec

CoTec Holdings Corp. (TSX-V:CTH)(OTCQB:CTHCF) is redefining the future of resource extraction and recycling. Focused on rare earth magnets and strategic materials, CoTec integrates breakthrough technologies with strategic assets to unlock secure, sustainable, and low-cost supply chains for the United States and its allies.

CoTec’s mission is clear: accelerate the energy transition while strengthening U.S. economic and national security. By investing in and deploying disruptive technologies, the Company delivers capital-efficient, scalable solutions that transform marginal assets, tailings, waste streams, and recycled products into high-value critical minerals.

From its HyProMag USA magnet recycling joint venture in Texas, to iron tailings reprocessing in Québec, to next-generation copper and iron solutions backed by global majors, CoTec is building a diversified portfolio with long-term growth, rapid cash flow potential, and high barriers to entry. The result is a game-changing platform at the intersection of technology, sustainability, and strategic materials.

For more information, please visit www.cotec.ca

For further information, please contact:

Braam Jonker – (604) 992-5600

Forward-Looking Information Cautionary Statement

Statements in this press release regarding the Company and its investments which are not historical facts are “forward-looking statements” which involve risks and uncertainties, including statements relating to the Company’s interest in HyProMag USA, the potential future value of HyProMag USA and its potential future listing in the United States and management’s expectations with respect to its current and potential future investments, including HyProMag USA, and the benefits to the Company which may be implied from such statements. Since forward-looking statements address future events and conditions, by their very nature, they involve inherent risks and uncertainties. Actual results in each case could differ materially from those currently anticipated in such statements, due to known and unknown risks and uncertainties affecting the Company, including but not limited to resource and reserve risks; environmental risks and costs; labor costs and shortages; uncertain supply and price fluctuations in materials; increases in energy costs; labor disputes and work stoppages; leasing costs and the availability of equipment; heavy equipment demand and availability; contractor and subcontractor performance issues; worksite safety issues; project delays and cost overruns; extreme weather conditions; and social and transport disruptions. For further details regarding risks and uncertainties facing the Company please refer to “Risk Factors” in the Company’s filing statement dated April 6, 2022, a copy of which may be found under the Company’s SEDAR+ profile at www.sedar.com. The Company assumes no responsibility to update forward-looking statements in this press release except as required by law. Readers should not place undue reliance on the forward-looking statements and information contained in this news release and are encouraged to read the Company’s continuous disclosure documents which are available on SEDAR+ at www.sedarplus.ca .

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

---

[i] Association for the Advancement of Cost Engineering (AACE) – Class 2 Estimate includes contingency of 8.2%

[ii] https://hypromagusa.com/hypromag-usa-expands-feedstock-supply-agreementwith-global-electronics-recycler-intelligent-lifecycle-solutions/

[iii] 7% real discount rates. NPVs are calculated by discounting real US dollar cash flows from 2026

[iv] Current market prices (“Current Prices”) for all NdFeB products sold in the U.S, excluding residual scrap, derived from updated U.S. 2024 price quotes, over the life of the asset

[v] NPV does not include the economic benefit of any government or state incentives, carbon pricing

[vi] Forecast market prices (“Forecast Prices”) are the prices for all NdFeB products sold in the U.S, excluding residual scrap feed, with the rare earth price component thereof derived from the latest rare earth oxide price forecasts from Q4 (2025) Adamas Intelligence, over the life of the asset

[vii] All In Sustaining Cost per kilogram of product sold

[viii] Capital excludes any U.S. tariffs

[ix] Payback defined as the period required to payback initial capital from first production

[x] The profitability index is a measure of the capital efficiency of a project and is defined as the project’s NPV divided by the project capital incurred to reach first production

[xi] https://hypromagusa.com/hypromag-usa-finalizes-long-term-lease-for-dallas-fort-worth-rare-earth-magnet-recycling-and-manufacturing-hub/

[xii] https://www.cotec.ca/news/hypromag-usa-expands-feedstock-supply-agreement-with-global-electronics-recycler-intelligent-lifecycle-solutions

[xiii] https://cotec.ca/news/hypromag-usas-iso-compliant-product-carbon-footprint-study-confirms-exceptionally-low-co2-footprint-of-235-kg-co2-eq-per-kg-of-ndfeb-cut-sintered-block

^[Xii] AISC is not a recognizes term under IFRS and have been determined using industry guidelines and practices

SOURCE: CoTec Holdings Corp.

View the original press release on ACCESS Newswire

With an expected historic refund season on the horizon, new law brings major shifts to credits, deductions, and planning for families and small businesses.

HURST, TX / ACCESS Newswire / December 15, 2025 / With the newly passed OBBBA ushering in some of the most significant tax changes in years, Liberty Tax^® is stepping up to ensure local taxpayers don’t miss out on valuable new savings. The company is offering free OBBBA Tax Impact Consultations, designed to help families, workers, and small business owners understand, and maximize the law’s many new deductions and credits.

“The OBBBA represents one of the largest updates to the tax code in over a decade,” said Scott Terrell, CEO of Liberty Tax. “These new rules can be confusing, but our offices are staffed with local experts who understand exactly how these changes affect real families and small businesses.”

What the OBBBA Means for Taxpayers

The new federal law includes a powerful mix of permanent tax cuts and temporary money-saving opportunities:

• Individual Tax Rates & Standard Deduction
  The current rate brackets (10%, 12%, 22%, 24%, 32%, 35%, and 37%) are made permanent, along with the nearly doubled standard deduction that many taxpayers have used in recent years.

• Child Tax Credit
  A boosted $2,200 Child Tax Credit per qualifying child, with future inflation adjustments beginning in 2026.

• New Temporary Deductions (through 2028) – even for many non-itemizers

  • Up to $25,000 for certain “qualified” tip income

  • Up to $12,500 for “qualified” overtime pay (up to $25,000 for joint filers)

  • Up to $10,000 of interest on new auto loans for U.S.-assembled vehicles

  • An additional deduction of up to $6,000 for seniors age 65 and older

• State and Local Tax (SALT) Deduction
  This is especially important for taxpayers in higher-tax areas or with significant property taxes. The SALT deduction cap is temporarily raised to $40,000 (from $10,000) through 2029, with a small annual increase, before it is scheduled to drop back to $10,000 in 2030.

• Small Business & Self-Employed Expensing
  The OBBBA makes key business provisions permanent, including 100% bonus depreciation for qualifying equipment and immediate expensing of domestic research and development (R&D) costs-changes that can significantly affect cash flow and tax planning for small businesses.

• Clean Energy & Other Credits
  Many clean energy tax credits from the Inflation Reduction Act, including credits for some electric vehicles and residential clean energy systems, are being repealed or phased out, potentially changing the value of certain purchases going forward.

• “Trump Accounts” for Minors
  The law creates a new type of tax-advantaged savings account for children, sometimes referred to as “Trump Accounts,” with a potential one-time $1,000 government contribution for eligible children born between 2025 and 2028.

“The OBBBA impacts every household differently,” said Scott Terrell. “That’s why sitting down with a Liberty Tax expert for a one-on-one review is essential.”

A potential Record-Breaking Refund Season Ahead

Financial analysts, economist and federal reports point to a massive surge in tax refunds for 2026, driven by no inflation adjustments to withholdings tables, expanded credits, and many changes to the tax code. As highlighted by the House Ways and Means Committee:

“2026 tax refunds projected to be largest ever” and tax filers could see refunds averaging roughly $1,000 higher than last year… setting the stage for a potentially record-breaking refund season.**

Free OBBBA Tax Impact Consultations: Your Personalized Savings Snapshot

To support local taxpayers, Liberty Tax is offering a complimentary consultation focused specifically on the OBBBA. During this session, our tax professionals will:

• Review your 2024 tax situation and how it may change for the 2025 filing season

• Identify which new deductions or credits you may qualify for under the OBBBA

• Discuss how the changes may affect your refund, balance due, or estimated taxes

• Help small business owners understand new expensing and planning opportunities

• Outline next steps and documents to gather before filing your return

Consultations are available by appointment and, in many locations, on a walk-in basis. For more information or to book an appointment, contact Liberty Tax at (866) 871-1040 or visit www.LibertyTax.com. Tax filers who choose to partner with Liberty Tax will receive 5-star customer service along with year-round support and our accuracy guarantee.

About Liberty Tax

At Liberty Tax, our clients are looking for someone they can trust, a price they can afford, and to either owe less on taxes or get their largest possible refund. Our 12,000+ tax professionals across the United States offer free tax consultations, in-office and remote tax prep, and a variety of other services. Our offices average a 4.5-star rating on Google and 87% of all our reviews are positive. We’re committed to building long-term relationships and establishing ourselves as trusted tax experts for life. See why our customers choose us at: www.libertytax.com

The information provided herein is for general informational purposes only and it is not intended as legal, financial, or tax advice. Liberty Tax^® and its franchisees are not responsible for any changes in tax law or individual eligibility for deductions or credits. Consult your Liberty Tax professional for guidance specific to your unique tax circumstances.

** https://waysandmeans.house.gov/2025/11/17/big-beautiful-success-story-2026-tax-refunds-projected-to-be-largest-ever/

Contact Information

Marketing Team
Marketing Manager
marketing.support@libtax.com
866.871.1040

SOURCE: Liberty Tax

View the original press release on ACCESS Newswire

mNEXSPIKE is Moderna’s third product to receive a positive CHMP opinion alongside Spikevax (COVID-19 Vaccine, mRNA) and mRESVIA (Respiratory Syncytial Virus Vaccine)

mNEXSPIKE will be available in the European Union, subject to authorization by the European Commission

CAMBRIDGE, MA / ACCESS Newswire / December 15, 2025 / Moderna, Inc. (NASDAQ:MRNA) today announced that the European Medicines Agency’s (EMA) Committee for Medicinal Products for Human Use (CHMP) has adopted a positive opinion recommending marketing authorization of mNEXSPIKE® (mRNA-1283), a new COVID vaccine, for active immunization to prevent COVID-19 caused by SARS-CoV-2 in individuals aged 12 years and older. Following the CHMP’s positive opinion, the European Commission will make a marketing authorization decision.

The CHMP’s positive opinion for mNEXSPIKE reflects Moderna’s continued commitment to advancing innovative vaccines that protect the most vulnerable,” said Stéphane Bancel, Chief Executive Officer of Moderna. “Across Europe, adults aged 65 and older remain disproportionately affected by severe COVID outcomes, and if authorized, mNEXSPIKE will be another important tool in addressing this ongoing public health need. Europe represents a significant market for respiratory virus vaccines, and we are excited about the opportunity to drive sales growth in 2026 and 2027 through this potential new product launch and geographic diversification. I want to thank our teams for their exceptional work and the EMA for its thorough assessment.”

Across Europe, COVID-19 continues to persist year-round, with periodic case increases driven by waning immunity and the emergence of new Omicron-lineage variants, as demonstrated through the European Centre for Disease Prevention and Control’s (ECDC) respiratory virus surveillance system.^[1] These trends confirm that COVID-19 has become an established, endemic respiratory pathogen in the region, requiring targeted protection for vulnerable populations.

The CHMP’s positive opinion for mNEXSPIKE is supported by results from a randomized, observer-blind, active-controlled Phase 3 clinical trial (ClinicalTrials.gov Identifier: NCT05815498), which enrolled approximately 11,400 participants aged 12 years and older. The primary efficacy objective in this study was to demonstrate the non-inferior vaccine efficacy against COVID-19 starting 14 days after mNEXSPIKE compared to that after the comparator vaccine, mRNA-1273 (Spikevax®), Moderna’s original COVID-19 vaccine. Participants received either a 10 μg dose of mRNA-1283 or a 50 μg dose of mRNA-1273. mRNA-1283 showed a 9.3% higher relative vaccine efficacy (rVE) compared to mRNA-1273 in individuals aged 12 years and older, and in a descriptive sub-group analysis, a 13.5% higher rVE in adults aged 65 and older.

In the Phase 3 trial, mRNA-1283 was found to have a similar safety profile to mRNA-1273, with fewer local reactions and comparable systemic reactions. The most commonly solicited side effects were injection site pain, fatigue, headache and myalgia.

Subject to the European Commission’s decision, Moderna expects to make mNEXSPIKE available in Europe pending regulatory timelines and local market access pathways. mNEXSPIKE is Moderna’s third product to receive a positive CHMP opinion alongside Spikevax and mRESVIA®, the Company’s approved respiratory syncytial virus (RSV) vaccine.

Moderna has filed mRNA-1283 for approval with regulators in multiple markets around the world, and has received approval from the U.S. Food and Drug Administration (FDA) and Health Canada.

About Moderna

Moderna is a pioneer and leader in the field of mRNA medicine. Through the advancement of its technology platform, Moderna is reimagining how medicines are made to transform how we treat and prevent diseases. Since its founding, Moderna’s mRNA platform has enabled the development of vaccines and therapeutics across infectious diseases, cancer, rare diseases and more.

With a global team and a unique culture, driven by the company’s values and mindsets, Moderna’s mission is to deliver the greatest possible impact to people through mRNA medicines. For more information about Moderna, please visit modernatx.com and connect with us on X, Facebook, Instagram, YouTube and LinkedIn.

Spikevax®, mRESVIA® and mNEXSPIKE® are registered trademarks of Moderna.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended, including statements regarding: the availability of mNEXSPIKE in Europe for the 2026-2027 season; the European Commission’s pending marketing authorization decision; the opportunity in the European respiratory virus vaccine market; the ability of Moderna’s COVID vaccines to generate an immune response and to protect against circulating COVID strains; and the safety profile of mNEXSPIKE. The forward-looking statements in this press release are neither promises nor guarantees, and you should not place undue reliance on these forward-looking statements because they involve known and unknown risks, uncertainties, and other factors, many of which are beyond Moderna’s control and which could cause actual results to differ materially from those expressed or implied by these forward-looking statements. These risks, uncertainties, and other factors include, among others, those risks and uncertainties described under the heading “Risk Factors” in Moderna’s Annual Report on Form 10-K for the fiscal year ended December 31, 2024, and in subsequent filings made by Moderna with the U.S. Securities and Exchange Commission, which are available on the SEC’s website at www.sec.gov. Except as required by law, Moderna disclaims any intention or responsibility for updating or revising any forward-looking statements contained in this press release in the event of new information, future developments or otherwise. These forward-looking statements are based on Moderna’s current expectations and speak only as of the date of this press release.

Moderna Contacts

Media:
Chris Ridley
Head of Global Media Relations
+1 617-800-3651
Chris.Ridley@modernatx.com

Investors:
Lavina Talukdar
Senior Vice President & Head of Investor Relations
+1 617-209-5834
Lavina.Talukdar@modernatx.com

View the original press release on ACCESS Newswire

AI-driven site selection helped the Dallas developer identify Bishop Arts early and expand affordable-luxury housing across DFW

DALLAS, TX / ACCESS Newswire / December 15, 2025 / As The New York Times recently highlighted Bishop Arts as one of the most vibrant and fastest-growing neighborhoods in the country, Baluch Brothers Development (BBD) is expanding its presence in the district-after having identified and entered the area nearly two years earlier using its proprietary AI-driven site-selection platform

Baluch Brothers PR content – Am…

While many developers follow media attention, BBD moved ahead of it.

Founded and led by Dr. Amir Baluch, Baluch Brothers Development uses advanced analytics to identify high-potential neighborhoods long before they reach mainstream awareness. The firm’s AI models analyze psychographic behavior, migration flows, zoning changes, and city-planning data to surface early signals of sustained demand-signals that traditional market analysis often misses.

“Bishop Arts was not a guess for us,” said Dr. Amir Baluch, Founder and CEO of Baluch Brothers Development. “Our data flagged it early for walkability, cultural momentum, and demographic inflows. The New York Times feature didn’t create the opportunity-it validated the decision we made years ago.”

Addressing DFW’s Housing Gap With Affordable Luxury

The Dallas-Fort Worth metroplex continues to add more than 400 residents per day and faces an estimated shortage of over 85,000 homes. At the same time, rising home prices and limited inventory have pushed many families and professionals out of traditional ownership paths.

Baluch Brothers Development focuses on modern built-to-rent communities-delivering single-family homes that provide more space, privacy, and stability than apartments, without the long-term burden of ownership.

Each BBD home is designed around how people live today and typically includes:

• 200-600 additional square feet compared to standard apartments

• Energy-efficient construction

• EV-ready garages

• Smart-home technology

• Pet-friendly layouts

• Community green spaces

Built-to-rent communities are seeing retention rates above 60%, reflecting strong and durable demand for this housing model.

Bishop Arts: A Live-Work Community, Not a Trend

Bishop Arts has emerged as one of Dallas’s most walkable and culturally rich districts-combining restaurants, retail, green spaces, and residential demand in a way few neighborhoods can replicate.

“Our goal isn’t to chase appreciation cycles,” Dr. Baluch added. “We build in neighborhoods where people want to live, work, and stay. Bishop Arts fits that profile-and it’s only one of several DFW pockets our models continue to flag for long-term growth.”

About Baluch Brothers Development

Founded in 2010, Baluch Brothers Development is a Dallas-based real estate development firm specializing in affordable-luxury single-family rental communities across high-growth areas of the DFW metroplex. By combining AI-driven analytics with disciplined development execution, BBD identifies emerging neighborhoods early and builds sustainable housing designed for modern families and professionals.

Press Contacts
Baluch Brothers LLC.
Daniel Madhan
daniel@baluchcapital.com
1-469-940-3763

SOURCE: Baluch Capital

View the original press release on ACCESS Newswire